Plaskolite, LLC

An employee was pulling material from a reel while walking backward. They tripped on a pallet in the aisle and fell, sustaining fractured ribs and a punctured lung.

An employee was trying to clear debris from the bottom area of a material transfer belt feeding a grinder. As the employee used a hand rake to push/pull materials lodged between the conveyor roller and the side wall of the conveyor chute, the rake itself became caught. The employee was trying to dislodge it when their right index finger was caught and pinched between the roller and the rake. They suffered a partial amputation to the fingertip.

An employee was setting up an extrusion line and attempting to grab film when the employee strained the lower back muscles. The employee was hospitalized with a lower right-side back strain.

On October 7, 2017, an employee was clearing a jam from a hopper when the slide gate of a hopper closed on the employee's hand, amputating it.

At approximately 4:30 a.m., on May 12, 2017, an employee was operating an extrusion line when the film caused the sheet to become stuck at the center trim saw. He went under the line and pushed the sheet up to free it. When he did this, the force of the sheet pulled his hand toward the saw, which amputated his ring and middle fingertips.

An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.

An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.

An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.

On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.

An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.

An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.

An employee was working to clear a rotary valve on a pugmill. Two fingertips were amputated by the rotary valve.

An employee was climbing an 8-foot ladder to clean windows on a house. The employee was reaching to the right when they lost their balance and slipped. The employee fell and their foot became caught in the ladder rungs, causing both the employee and the ladder to fall to the ground. The employee sustained a fracture to the right leg requiring hospitalization and surgery.

An employee was offloading material using a forklift when the hoisted material began shifting. The employee went to manually stabilize the load and their right middle fingertip was pinched and amputated.

An employee was packing candles on a line. They reached down to pick up a 12-pack of candles when their right little finger was caught in the conveyor belt, resulting in an amputation at the distal joint.

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.