Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Greif Inc., 174 Callhan Rd, DALTON, GEORGIA 30721
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was trying to remove a tool from a machine when his right thumb was caught in the sprocket of the shaft of the machine resulting in an amputation. The machine was not locked out at the time.
An employee was troubleshooting the crimper action of a machine that made press paperboard cylindrical containers. As he passed a photo eye in an interlock gate area, the machine cycled and the indexing arm struck him on the head/face, crushing him against the chuck. He suffered a broken jaw, loss of teeth, and injuries to the back of the neck and head.
The operator entered information into the data screen of the line winder, then turned around and walked to the paper rolling machine on the line. He tripped on the edge of a presence sensing safety mat and fell into the machine. The employee's left arm struck a bar and his right hand landed on an in-running nip point of the vertical roller, horizontal feed belt, and the housing of the vertical belt. Three fingers on the operator's right hand were degloved.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
An employee was preparing to remove the drive chain of a conveyor motor. Their thumb became caught in the sprocket and chain of the drive motor, resulting in an amputation to the thumb tip between the nail and the first joint.
An employee was working with a drill press when his glove and forearm were caught by the drill bit, resulting in lacerations and fractures to his right forearm. The employee's arm was amputated below the elbow.
An employee was walking on a sidewalk when he stepped off the sidewalk into the grass. As he was stepping onto the concrete parking lot, he tripped over the edge of the concrete and fell onto his left hip. The employee was hospitalized.
An employee was changing the cooling nozzles on an aftercooler and the pneumatic power was activated. This caused the top plate to move into the top position and crush the employee's right arm. The employee sustained a fractured arm.
On October 15, 2024, an employee was cleaning a drum welder with a rag. The machine pulled in the rag and injured three fingers on the employee's left hand. The employee was hospitalized with three partially amputated fingers.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.