Fall on same level due to tripping over an object · Avulsions, enucleations
At a glance
Federal OSHA recorded a severe workplace injury
at Greif Inc, 70 Better Way, CHICOPEE, MASSACHUSETTS 01022
on — Avulsions, enucleations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
The operator entered information into the data screen of the line winder, then turned around and walked to the paper rolling machine on the line. He tripped on the edge of a presence sensing safety mat and fell into the machine. The employee's left arm struck a bar and his right hand landed on an in-running nip point of the vertical roller, horizontal feed belt, and the housing of the vertical belt. Three fingers on the operator's right hand were degloved.
An employee was troubleshooting the crimper action of a machine that made press paperboard cylindrical containers. As he passed a photo eye in an interlock gate area, the machine cycled and the indexing arm struck him on the head/face, crushing him against the chuck. He suffered a broken jaw, loss of teeth, and injuries to the back of the neck and head.
An employee was trying to remove a tool from a machine when his right thumb was caught in the sprocket of the shaft of the machine resulting in an amputation. The machine was not locked out at the time.
An employee arrived at work and was walking into the store through the parking lot. The employee tripped over a curb and fell to the ground, sustaining a femur fracture.
An employee worked in the paper machine area for a shift, cutting corners off paper rolls around the roll machine. Afterwards, the employee sustained cramping and dehydration due to heat. The employee was hospitalized.
An employee was adjusting a trim sheet leading to a sheeter machine. Their glove became caught in the machine and the shearer closed on the employee's right hand, crushing it and breaking the hand and wrist.
An employee was troubleshooting a process upset. A nearby refiner had a pressure spike, causing the housing to separate slightly, which allowed the loss of primary containment. The employee was sprayed by hot water, resulting second- and third-degree burns on his torso and left arm.
On July 22, 2024, at 10:30 AM, an employee was responding to a pulp mill manufacturing process shutdown. Pulp stock overflowed through an engineered overflow pipe resulting in a buildup of stock in a bermed area. The stock was 140 to 150 degrees. The employee went to the bermed area to close an air-actuated process valve. While closing the valve, pulp stock entered the top of his boots and caused second-degree burns to both of his lower legs down to his feet. The employee was hospitalized.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.