Army and Air Force Exchange Services

An employee was in a shopping cart being pushed by co-workers when the cart turned over and the employee fell to the ground, resulting in a dislocated right knee.

An employee was moving a 78-pound boxed item to a ladder from a stocking shelf about 9 feet 7 inches above the ground. The employee fell from the ladder to the ground, suffering a bruised lung. The employee was hospitalized.

An employee was struck by a forklift, and the employee's left leg was briefly caught under the forklift. The employee suffered a broken left wrist and leg, as well as serious leg lacerations and contusions. The employee was hospitalized and had surgery.

An employee fell down the stairs while pulling a pallet jack, suffering fractured ribs and a lacerated spleen.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

An employee was using a CNC mill to drill and countersink holes in a plastic wood product. Their left hand contacted the point of operation (a 1/4" drill bit with a 3/4" countersink) of the vertical drill resulting in a fractured fourth finger and partial amputations (between the last joint and fingernail) of the middle and little fingers.

Two employees were performing merchandising duties and team lifting a wicker-style end table. The injured employee lost their grip on the table and it fell. The employee then lost their balance and fell to the floor, resulting in a fractured right leg near the knee.

A cashier turned and tripped over a register scanner cord. She fell to the floor, fractured her right knee, and dislocated her left shoulder.

An employee placed a bale of hay in the back of vehicle and the vehicle departed the area. The employee started sweeping hay that had fallen onto the dock platform when they fell on the wet hay. The employee then fell 3-4 feet off the dock platform, resulting in a broken left hip.

An employee was working on the sales floor in the entertaining department of the store. As she was backing up, she tripped over a charcuterie board sticking out of a shelf and fell to the concrete floor. She sustained a broken left little toe and a displaced pelvic fracture.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.