Struck by running powered equipment n.e.c. · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at Frog Furnishings, 15750 South Keeler Terrace, OLATHE, KANSAS 66062
on — Amputations involving bone loss, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was using a CNC mill to drill and countersink holes in a plastic wood product. Their left hand contacted the point of operation (a 1/4" drill bit with a 3/4" countersink) of the vertical drill resulting in a fractured fourth finger and partial amputations (between the last joint and fingernail) of the middle and little fingers.
Amputation Finger or thumb tip(s), nail(s) Stationary drills, milling machinery
An employee was operating a jointer machine to manufacture wood products when his left little finger was pulled into the rotating blade, resulting in a partial amputation.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
More severe injuries in this industry (NAICS 442299)
Two employees were performing merchandising duties and team lifting a wicker-style end table. The injured employee lost their grip on the table and it fell. The employee then lost their balance and fell to the floor, resulting in a fractured right leg near the knee.
An employee placed a bale of hay in the back of vehicle and the vehicle departed the area. The employee started sweeping hay that had fallen onto the dock platform when they fell on the wet hay. The employee then fell 3-4 feet off the dock platform, resulting in a broken left hip.
An employee was working on the sales floor in the entertaining department of the store. As she was backing up, she tripped over a charcuterie board sticking out of a shelf and fell to the concrete floor. She sustained a broken left little toe and a displaced pelvic fracture.
An employee was applying labels to a skid. The employee slipped on a sheet of labels that had fallen to the floor and fell to the concrete floor, suffering a broken hip that required surgery.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.