De Wafelbakkers, LLC

At 1:30 p.m. on April 14, 2024, a quality control employee was trying to remove a pancake from a chain using a pen. The pen became stuck. As the employee tried to reach under the chain, it amputated the tip of her right little finger.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was attempting to straighten a wooden pallet with a bar. The pallet was positioned on top of a frame conveyor system 1 foot off of the ground. While maneuvering the bar, the employee lost balance and fell backward onto the concrete floor, extending their right hand to catch themselves as they fell. The employee suffered two fractured bones in their wrist and one fractured bone in their right hand.

An employee was working near a conveyor when his left middle finger was caught in the conveyor. The employee required surgery and their finger was partially amputated.

An employee was filling a hopper that deposited blueberries in muffin trays. Two plastic plates inside the equipment closed, pinching and amputating the employee's left ring fingertip. The equipment was running and unguarded at the time.

An employee was returning a catch pan to a machine after dumping fruit out of it. The employee's hand was caught in a roller in the conveyor area of the fruit inspection line, and the employee's right arm was broken.

An employee had been using soap and a towel to clean a slicer. They were finishing the cleaning procedure when the power switch was activated. The slicer turned on while the employee's right ring finger was in the blade gap and the blade amputated their fingertip without bone loss.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.