Performance Food Group- Little Rock

An employee was delivering groceries. He fell and broke his left ankle while pushing a dolly down a ramp, requiring surgery.

The employee was hooking up the trailer dolly to the trailer. A pin on the dolly had fallen down and the employee reached down to correct the pin. The dolly was still moving and pinned his fingers between the I-ring of the dolly and the trailer hitch. The employee's first digit of his right pinky finger was amputated.

An employee was fixing ceiling tiles while working from a ladder when they fell to the floor and sustained a hip fracture.

An employee was on an A-frame ladder retrieving materials from a shelf. He slipped and fell and his leg got caught in the ladder rungs, breaking his left tibia.

An employee was unloading materials from a flatbed trailer when they fell from the trailer and landed on the ground. The employee sustained a fractured left leg.

An employee was unloading appliances at a customer location for delivery. The employee was moving a water heater to be placed on the liftgate when he stepped backward and fell to the ground. The employee sustained rib and back injuries.

An employee was coming down a portable ladder when they slipped and fell to the ground, resulting in a right forearm fracture.

An employee was working to unjam an auger screw. The screw caught his glove, resulting in a severe open fracture to his left lower forearm. He was hospitalized, requiring surgery.

An employee was working in a warehouse without air conditioning on a day when the temperature outside was in the 90s. The employee developed heat stress, became ill, and was hospitalized.

An employee was walking in the middle of the track during heavy rain when he slipped on a rail transition and fell, hitting his arm on the rail. The employee was hospitalized with a fractured left arm.

An employee was scraping down the sides of a mixing machine. The machine activated and her right arm was caught in the auger, resulting in a fractured lower arm.

Two employees were conducting a roll change on a rolling mill machine using a porter bar and a counterweight sleeve. The sleeve slid back and crushed the injured employee's right index fingertip between the sleeve and the counterweight, resulting in a partial amputation.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.