JMR Construction

An employee was transitioning from a ladder onto a roof when the ladder slipped and they fell approximately 20 feet to the ground. The employee was hospitalized with fractures to their pelvis and heel.

An employee was tearing down shingles when they fell approximately 18 feet from a roof to the ground, sustaining a broken ankle.

An employee was climbing a ladder to bring material onto a roof. The ladder slid and the employee fell 16 feet to the ground, resulting in a broken knee.

An employee was performing an inspection of a bridge crane while working from a 19-foot scissor lift. The employee was going to use a pendant to move the crane to access a different portion of the crane for visual inspection. The scissor lift guard rails were below the girder of the crane to avoid contact. The tow arm for the crane collectors contacted the guardrail of the scissor lift and caused it to tip over. The employee stayed inside the scissor lift basket as he fell to the floor. The employee sustained fractures to the right arm and hip.

An employee was on a forklift that was elevated approximately 20 feet and was auditing inventory. The forklift malfunctioned and the employee fell down to the surface below, causing them to sustain multiple fractures.

An employee was shoveling excess material (spillage) that consisted of dry mix, sand, aggregate and cement. As he was shoveling, some material blew back in his face and around his safety glasses. He got a piece of metal in his left eye that required surgery. The employee was hospitalized.

An employee was spotting the dust auger as it was lowered onto the trailer so that it would not contact a piece of equipment already on the trailer and pinch electrical cords. As the auger was being moved into place horizontally, his thumb was caught between two brackets, one on the auger and one on a piece of equipment already on the trailer. The employee sustained a partial amputation to the left thumb.

A temporary employee was bending rebar on a bending table (machine) when his right little finger got caught in the rollers. The employee sustained an amputation down to the first knuckle below the fingernail.

At 10:00 a.m., an employee was preparing to cut lumber for an A-frame structure using a compound miter saw when the saw kicked back and contacted his left hand. The employee sustained complete amputation of the thumb and a partial amputation of the index finger.

An employee was unloading a bundle of quartz slabs from a truck bed using a forklift and lifting slings. The employee was standing on the truck bed to secure the slings to the bundle when one of the two A-frames supporting the bundle fell over. The employee jumped off the truck bed to avoid being hit, causing them to strike the ground and sustain fractures to their left hip, femur, and elbow.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.