Cincinnati Incorporated

A piece of sheet steel fell from a sawhorse onto an employee's right leg and foot, resulting in fractures.

An employee was remotely operating a 25-ton gantry crane with a magnet attachment to unload a steel plate (approximately 96'' x 280'') from a semi-truck to the ground in the steel yard. The plate struck the employee as it was being moved, resulting in three fractures to his right arm that required hospitalization and surgery.

An employee was prepping the pallet gate door for removal. While pulling the center drive piston from the door, the employee sustained an inguinal hernia.

An employee was collapsing a portable paint booth when the booth tipped forward and landed on them. The employee sustained fractured ribs.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was standing on some large wooden storage crates, adjusting a tarp to cover them. He fell from the crates to the parking lot ground, landed on his left side, and suffered several broken ribs. He was hospitalized.

An employee was remotely operating a 25-ton gantry crane with a magnet attachment to unload a steel plate (approximately 96'' x 280'') from a semi-truck to the ground in the steel yard. The plate struck the employee as it was being moved, resulting in three fractures to his right arm that required hospitalization and surgery.

An employee was polishing a guide pin using a CNC lathe when his left glove got caught on the chuck or tool and three of his fingers were pulled in. The employee was hospitalized and underwent reattachment surgery for finger amputations.

On May 2, 2025, two employees were lifting a pallet jack with a built-in weight measuring plate into the bed of a truck when the plate shifted as they were lifting it. The plate crushed and severed the injured employee's middle and ring fingertips. A fingertip was amputated.

An employee was cleaning a camera lens on a wheel dresser, a machine used to correct the shapes of grinding wheels. The employee's right index finger was caught between the wheel dresser and the grinding wheel being serviced. The fingertip was amputated at the first joint.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.