Cincinnati Incorporated

An employee was remotely operating a 25-ton gantry crane with a magnet attachment to unload a steel plate (approximately 96'' x 280'') from a semi-truck to the ground in the steel yard. The plate struck the employee as it was being moved, resulting in three fractures to his right arm that required hospitalization and surgery.

An employee was prepping the pallet gate door for removal. While pulling the center drive piston from the door, the employee sustained an inguinal hernia.

An employee was replacing springs in a counter balance unit on a shear machine when something shifted in the machine and his left hand was caught in the machine, resulting in amputation of the left ring fingertip.

An employee was collapsing a portable paint booth when the booth tipped forward and landed on them. The employee sustained fractured ribs.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

An employee was positioning a part inside a restrike hammer (full revolution drop hammer). The employee was wearing his safety pullout devices (metal cable with wristlets) at the time. As the employee positioned the part inside the die, he tripped the machine with his palm. As the ram went to drop, his pullout device (cotton rope connection) broke away from the press and his right hand was crushed by the top die as it fell. The employee was hospitalized and required surgery.

An employee was removing the bottom die from an auto hammer. He was pushing the die out with his left hand when the die bar slipped and fell on top of his left index finger, resulting in a fingertip amputation.

An employee was troubleshooting a coolant door fault on a machine when the right door actuated and crushed his right index finger, causing an amputation to the finger.

At about 9:00 a.m. on March 10, 2025, an employee was operating a lathe when a part jammed inside it. The employee was removing the jammed part when the machine's slide shifted, causing the lathe spindle to amputate his left ring fingertip.

An employee's glove was caught in a grinder wheel, resulting in amputation of their left little fingertip.

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.