105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Canam Steel Corporation

Struck by falling object or equipment, n.e.c. · Fractures

Federal OSHA recorded a severe workplace injury at Canam Steel Corporation, 140 S ELLIS ROAD, JACKSONVILLE, FLORIDA 32254 on — Fractures, affecting the thigh(s).

On November 8, 2021, an employee had finished dipping a bundle of steel joists in a paint tank and had set it to dry on top of a stack of bundles using a 10-ton overhead crane. While the employee was walking to get the overhead crane's hook to move the next bundle, the bundle he had just moved fell, causing him to become caught between the bundle and the paint tank. The employee suffered a broken left femur and was hospitalized.

Hospitalized Thigh(s) Bundles, bales

Canam Steel Corporation

An employee was rigging a steel joist to be lifted by a crane. The joist fell and pinned the employee against the concrete ground. The employee sustained fractures to multiple ribs, his right arm, right tibia, and an open fracture to his right ankle, as well as a dislocated right hip.

Canam Steel Corporation

An employee was manually moving steel across rollers when their right ring finger was caught between the steel and the rollers. The employee's fingertip was amputated.

Canam Steel Corporation

An employee was gathering scrap material and stocking it to the side of a line to reduce trip hazards. A piece of material caught the employee's glove, causing their left little finger to get caught by a large piece of steel being stacked. The employee suffered crush injuries that resulted in a fingertip amputation.

Canam Steel Corporation

An employee sustained heat-related illness while operating an overhead crane, resulting in acute kidney failure and hospitalization.

Canam Steel Corporation

On March 15, 2020, an employee was moving steel slip coils when a coil came off a crane. The employee's legs were pinned under the coil and one of his legs was broken. He was hospitalized.

View Canam Steel Corporation's full OSHA safety record →

Performance Contractors, Inc.

An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.

WIRECO WORLDGROUP, INC.

An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.

Owens & Minor - Pittsburgh Distribution Center

The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.

Retro Tech Systems

Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.

Creston Energy Group

An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.

Steel-King Industries, Inc.

On October 21, 2025, an employee was operating a saw when a pneumatic clamp caught their right middle finger. The employee suffered a partial amputation to the finger.

ORRVILON, INC

An employee completed an end cut on a metal shim and started transferring the metal shim from the saw conveyor to two saw horses in the area. The employee set one end of the shim (7 feet long x 8 inches wide, weighing 218 pounds) on one of the saw horses, then slid the other end onto the other saw horse and the shim fell from the first saw horse. The employee's left index fingertip was pinched between the saw horse and the shim, resulting in a skin avulsion. The fingertip was amputated later.

Cives Steel Company New England

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

Suburban Steel Supply

An employee was moving steel beams with an overhead crane when the bundle struck a bollard and became unstable. As the employee reached to stop the material from shifting, his thumb was pinched in-between the beams, resulting in a partial amputation.

Canam Steel Corporation

An employee was rigging a steel joist to be lifted by a crane. The joist fell and pinned the employee against the concrete ground. The employee sustained fractures to multiple ribs, his right arm, right tibia, and an open fracture to his right ankle, as well as a dislocated right hip.

DRIFTWOOD NURSERY & LANDSCAPING, INC

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

Hobby Lobby Stores, Inc.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

Envelope Seal Insulation, Inc

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

Sugar Cane Growers Cooperative of Florida

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

Air-flo/Erwood Heating & Air Conditioning

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.