Hussey Seating Company

An employee was running a drill press. The press caught the sleeve of the employee's welding jacket and pulled in the employee's arm. The employee's arm was fractured.

An employee was watching an operator load materials with a forklift. The operator tilted the forks slightly, which caused the material to break its straps and roll off the forks. The employee jumped to get out of the way and fell on the cement floor, fracturing his hip.

An employee was walking behind the store with another associate to get paperwork from the delivery driver when she fell on the walkway and sustained a leg fracture that required surgery.

An employee fell while giving a skiing lesson and sustained a broken leg.

An employee was adjusting the forks on a forklift when a fork detached from the forklift. The employee jumped out of the way but fell on the concrete floor. The employee was hospitalized with a broken hip.

An employee attempted to open a door while carrying packages when they fell and suffered a fractured left hip.

An employee was playing kickball as part of a team building activity when they fell and suffered a dislocated left foot.

An employee was flipping over a solid surface and the weight injured their back. The employee was hospitalized.

On March 19, 2025, at 1:35 p.m., two employees were loading a tractor trailer that was backed into a dock and connected to the dock lift. The driver began to drive away while the employees were still on the dock lift, which then collapsed. The injured employee fell to the ground, resulting in a right hip contusion that required hospitalization.

An employee was emptying scrap from a hopper into a metal dumpster. The employee released the hopper latch and his left index finger was caught between the fork and the hopper frame. The employee sustained a fingertip amputation.

An employee was loading a truck with product, reached to open the shipping door but grabbed a loading bar instead, causing him to fall out of the door. The employee fell approximately 4 feet to the ground and sustained a fracture to the lower right leg.

An employee was cutting a piece of wood using a table saw when the wood got stuck and his left thumb was amputated.

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.