Other jump to lower level, unspecified · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Seneca Foods Corporation, 418 E. Conde Street, JANESVILLE, WISCONSIN 53546
on — Second degree heat (thermal) burns, affecting the lower leg(s).
Final narrative
An employee was diagnosing an issue on a destoner. The employee went up a set of stairs and climbed onto the equipment. To get down, the employee jumped down onto the 180-degree pre-heat water reservoir cover. When the employee jumped down, his right leg landed on a carrot, which caused part of his right leg to go into a 3-by-3-foot open hatch and into the water below. The employee suffered second degree burns to his lower right leg.
HospitalizedLower leg(s)Food and beverage processing machinery-specialized, n.e.c.
Forklift drivers were unloading product from a semi trailer. One employee stopped their forklift about 15-20 feet from the back of the trailer, got out, and began adjusting the forklift's forks. Another forklift backed into the employee, who suffered a compound fracture of the left tibia and was hospitalized.
An employee was in the janitorial closet rearranging the janitor's cart. She stepped back and tripped over the wheel of the cart, causing her to fall to the ground and sustain a fractured hip.
An employee was loosening a pipe fitting using two pipe wrenches from the second step of a step ladder. When one of the pipe wrenches lost its grip on the fitting, the employee lost their balance and fell backward to the concrete floor, fracturing their left arm.
On October 17, 2023, at 2:30 p.m., an employee was cleaning a combine with a pressure washer when the water jet contacted his gloved hands. The employee suffered a laceration to their finger that required hospitalization.
An employee was preparing a seed auger for production. After sanitizing the auger trough in the cooker area, the employee was putting the plate guard back in place when they were struck by the turning seed auger. Their finger was fractured and dislocated. The employee's right hand was also lacerated.
An employee was crossing over a sorting belt and jumped down onto the catwalk next to the belt. The employee sustained a right ankle fracture and dislocation.
On November 7, 2023, at 6:00 PM, an employee was getting off a roof at the end of the work day. He missed a step and then jumped from the ladder to the ground sustaining a fractured ankle.
An employee was on the table of a machine. She went to jump down from the table and fractured her lower leg on the ground. The employee was hospitalized.
An employee was loading a flatbed trailer when a forklift bumped into the trailer. A wheelset began to roll in his direction and the employee jumped off the trailer to avoid it. The wheelset caught him on the leg and he landed on his shoulder on the ground. He sustained a laceration below the left kneecap and a dislocated shoulder.
An employee was adjusting the tension on the fruit distribution conveyor belt. While testing the tension, the employee's left hand/arm was pulled into the rollers. The employee's lower left arm was fractured.
Forklift drivers were unloading product from a semi trailer. One employee stopped their forklift about 15-20 feet from the back of the trailer, got out, and began adjusting the forklift's forks. Another forklift backed into the employee, who suffered a compound fracture of the left tibia and was hospitalized.
An employee was in the janitorial closet rearranging the janitor's cart. She stepped back and tripped over the wheel of the cart, causing her to fall to the ground and sustain a fractured hip.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.