Pedestrian struck by vehicle backing up in nonroadway area · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Seneca Foods Corporation, 500 South Clark Street, MAYVILLE, WISCONSIN 53050
on — Fractures , affecting the Lower leg(s).
Final narrative
Forklift drivers were unloading product from a semi trailer. One employee stopped their forklift about 15-20 feet from the back of the trailer, got out, and began adjusting the forklift's forks. Another forklift backed into the employee, who suffered a compound fracture of the left tibia and was hospitalized.
Hospitalized Lower leg(s) Forklift, order picker, platform truck powered
An employee was in the janitorial closet rearranging the janitor's cart. She stepped back and tripped over the wheel of the cart, causing her to fall to the ground and sustain a fractured hip.
An employee was loosening a pipe fitting using two pipe wrenches from the second step of a step ladder. When one of the pipe wrenches lost its grip on the fitting, the employee lost their balance and fell backward to the concrete floor, fracturing their left arm.
On October 17, 2023, at 2:30 p.m., an employee was cleaning a combine with a pressure washer when the water jet contacted his gloved hands. The employee suffered a laceration to their finger that required hospitalization.
An employee was preparing a seed auger for production. After sanitizing the auger trough in the cooker area, the employee was putting the plate guard back in place when they were struck by the turning seed auger. Their finger was fractured and dislocated. The employee's right hand was also lacerated.
An employee was on an A-frame ladder, working to remove a pipe valve, when they fell approximately 5 feet to the floor. The employee was hospitalized with a skull fracture.
An employee was diagnosing the cause of a rear light malfunction on a forklift when the reverse gear engaged. The forklift moved backward and contacted the employee causing a metatarsal fracture in their left foot and injury to their lower right leg.
An employee was collecting shopping carts in the parking lot when he was struck by a customer's truck as it was backing out of a parking spot. The truck pinned the employee's left leg against the cart mule they were using. The employee was hospitalized with a fractured leg and required surgery.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee took a picture of the seal and license plate on a delivery truck after loading. The truck then reversed back to the dock and pinned the injured employee against the dock. The employee sustained an abdominal fracture.
An employee was between a milling machine and an 18-wheeler belly dump when the 18-wheeler backed up and ran over his feet and legs. The employee was caught between the front of the milling machine and the truck. The employee sustained fractures to their hip, leg, and feet.
More severe injuries in this industry (NAICS 311421)
An employee was adjusting the tension on the fruit distribution conveyor belt. While testing the tension, the employee's left hand/arm was pulled into the rollers. The employee's lower left arm was fractured.
An employee was in the janitorial closet rearranging the janitor's cart. She stepped back and tripped over the wheel of the cart, causing her to fall to the ground and sustain a fractured hip.
An employee was conducting sanitization activities on a slicer when their sleeve became entangled in the slicer. The employee was caught in the machine and was hospitalized with multiple arm injuries. The machine was running at the time.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.