ALBANY, GEORGIA—
Georgia-Pacific Wood Products LLC
Compressed or pinched by shifting objects or equipment · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury at Georgia-Pacific Wood Products LLC, 3150 Sylvester Road, ALBANY, GEORGIA 31705 on — Crushing injuries, affecting the arm(s), unspecified.
Final narrative
An employee locked out a stacker machine to begin repairs. The employee noticed a piece of metal was jammed in the equipment and attempted to remove the piece of metal. When the piece of metal was removed, an arm on the equipment dropped down due to gravity and pinned the employee's left arm against the frame of the equipment. The employee suffered a crush injury with potential tissue damage.
More severe injuries at Georgia-Pacific Wood Products LLC
CORRIGAN, TEXAS—
Georgia Pacific Wood Products LLC
An employee was cleaning an air station with a pressure washer when the water stream went through their boot and contacted their left foot, resulting in a 1.5 inch by 1 inch laceration to the top of the foot.
TAYLORSVILLE, MISSISSIPPI—
Georgia Pacific Wood Products, LLC
An employee was operating a forklift in reverse carrying five bundles of plywood. Upon applying the brakes, the top load shifted backward onto the top of the forklift cage and pinched the employee's the left middle fingertip against the forklift cage, resulting in a partial fingertip amputation.
PINELAND, TEXAS—
Georgia-Pacific Wood Products LLC
An employee was testing whether electricity was available at a valve on a piece of equipment that moved from side as it cut logs. After testing, he inserted an electric plug back into the valve. This caused the equipment to move to the side and then return to its home position. The employee was caught between a motor and a hydraulic tank and suffered an injury to the left shoulder and upper torso, resulting in three broken ribs.
ROME, GEORGIA—
Georgia-Pacific Wood Products LLC
On June 17, 2024, at approximately 5:55 a.m., a machine operator injured his right leg after stepping into a 6-inch gap between sections of the edger infeed platform grating. The employee sustained a muscle tear and hematoma.
BELK, ALABAMA—
Georgia-Pacific Wood Products LLC
An employee was helping repair a sawmill trimmer. The employee transferred a pry bar from their right hand to their left hand, then turned, at which point the employee's left middle fingertip was pinched between the pry bar and a saw box. The fingertip was crushed at the nailbed, but not fractured; the employee was hospitalized and required surgery.
View Georgia-Pacific Wood Products LLC's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 321113)
STATESBORO, GEORGIA—
Claude Howard Lumber Company
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
FREEPORT, TEXAS—
Shintech Inc
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
OPELIKA, ALABAMA—
West Fraser, Inc.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
REDWOOD, MISSISSIPPI—
SWS Sawmill, LLC
An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.
ATHOL, IDAHO—
IDAHO FOREST GROUP, LLC
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
More severe injuries in GEORGIA
PEACHTREE CITY, GEORGIA—
GS II Building Products, Inc.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
AUGUSTA, GEORGIA—
US Battery Manufacturing Company, Inc
A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.
CARTERSVILLE, GEORGIA—
Alfa Insurance
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
ATLANTA, GEORGIA—
EMORY UNIVERSITY HOSPITAL
An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.
TRENTON, GEORGIA—
Bull Moose Tube
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.