US Foods

An employee was driving a pallet jack through the aisles in a cooler department. During a left turn, the jack went out of control. The employee was thrown off the jack and into a rack, suffering a broken ankle.

An employee was using a handcart to roll a stack of product from a truck onto a dock plate when she slipped and fell to the floor, resulting in a broken right fibula.

On November 14, 2024, at approximately 10:30 a.m., an employee was operating a powered industrial truck in an aisle when his left hand was caught between the rack and the vehicle. The injury required surgery.

An employee was operating a powered industrial truck when it collided with another piece of equipment. The employee sustained an injury to their right foot.

An employee was walking a riding pallet jack in an aisle when the pallet jack pinned his right ankle against a pallet rack, fracturing it.

A crew was pulling a 4-inch plastic gas pipe off a reel and straightening it for installation. The injured employee stepped up on the trailer to cut the last band holding the pipe in the coil on the reel. As he turned to step off the trailer, the end of the pipe rotated and sprung out of the cage surrounding the coil, striking the employee on the side of the head and knocking him off of the trailer into the roadway. The employee suffered head trauma that required hospitalization.

An employee and a co-worker were performing a pick inside a clear well. They rigged the skid pan that was full of broken concrete. When lifting, the load began to swing toward a wall. The employee tried to stop the skid pan from swinging and was struck by the pan, resulting in fractures to their left hip and wrist.

The employee had just completed refueling a lattice crane that was breaking up material and was winding the fuel hose back into the fuel truck when he was struck by the catwalk/stairs of the crane. The employee was hospitalized with a laceration to his backside, possible internal bleeding, and a broken hip.

An employee was fusing 10-inch black rubber utility pipes together using a pipe fusion machine and could not get the pipes to set correctly. The employee used a nylon strap attached to an excavator to lift one side of a pipe off a steel plate. As his hand was between two pipes, the pipes came back together, partially amputating two of his fingers.

An employee was lifting four bags of a lime blend weighing approximately 10,000 pounds using a crane. The load swung and pinned the employee against a structural I-beam, resulting in fractures to the hip and pelvis.

An employee was cleaning a depositor machine to setup for a new product run. His right index finger was caught by moving parts in the depositor machine and the fingertip was partially amputated without bone loss.

An employee was under a label machine, working to remove a jammed label. The machine partially amputated her left index finger at the first knuckle.

An employee was operating an electric pallet jack. While standing beside the equipment, the pallet jack lurched forward, pinning the employee's leg against racking. The employee was hospitalized with a fractured right ankle.

An employee was on a top stock cart, moving items on shelving on the sales floor. The employee fell and suffered a broken left ankle. The employee was hospitalized, requiring surgery.

An employee was using a walkie stacker when the merchandise on it shifted and fell onto him. He suffered a head injury and a broken left leg that required surgery. He was hospitalized.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.