Other fall to lower level less than 6 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Georgia Pacific Wood Products, LLC, 3150 Sylvester Road, ALBANY, GEORGIA 31705
on — Fractures, affecting the hip(s).
Final narrative
An employee had just finished a repair on a tilt hoist. He climbed a 9-foot A-frame ladder to ensure that a nut on the chain tensioner was tight. He then climbed down the ladder, which had been leaned against the frame of the tilt hoist. When he was at the second rung from the bottom, the ladder slid down. He did not fall from the ladder but struck his right hip on the ladder as it slid down, breaking it.
HospitalizedHip(s)Step ladders
More severe injuries at Georgia Pacific Wood Products, LLC
An employee was cleaning an air station with a pressure washer when the water stream went through their boot and contacted their left foot, resulting in a 1.5 inch by 1 inch laceration to the top of the foot.
An employee was operating a forklift in reverse carrying five bundles of plywood. Upon applying the brakes, the top load shifted backward onto the top of the forklift cage and pinched the employee's the left middle fingertip against the forklift cage, resulting in a partial fingertip amputation.
An employee was testing whether electricity was available at a valve on a piece of equipment that moved from side as it cut logs. After testing, he inserted an electric plug back into the valve. This caused the equipment to move to the side and then return to its home position. The employee was caught between a motor and a hydraulic tank and suffered an injury to the left shoulder and upper torso, resulting in three broken ribs.
On June 17, 2024, at approximately 5:55 a.m., a machine operator injured his right leg after stepping into a 6-inch gap between sections of the edger infeed platform grating. The employee sustained a muscle tear and hematoma.
An employee was helping repair a sawmill trimmer. The employee transferred a pry bar from their right hand to their left hand, then turned, at which point the employee's left middle fingertip was pinched between the pry bar and a saw box. The fingertip was crushed at the nailbed, but not fractured; the employee was hospitalized and required surgery.
An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.
An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.
An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.
An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.
An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.
More severe injuries in this industry (NAICS 321113)
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.