Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Phillips Manufacturing LLC, 504 Walnut Street Southeast, NILES, OHIO 44446
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee had just cleaned the vacuum on a compound miter saw. About to cut lumber, the employee put his hand behind the blade to check if the vacuum was working. The saw activated and the blade caused an amputation to his left little finger.
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 321213)
An employee became overheated while working at a plywood production facility. The employee sustained dehydration, heat syncope, rhabdomyolysis, and an acute kidney injury.
An employee was standing on a platform, cleaning a mold, when he fell through an opening in the platform to the concrete floor approximately 6 feet below. The employee was hospitalized with injuries to his shoulder, elbow, and rib.
The injured employee was on the ground level receiving an OSB board from a co-worker who was on a 10-foot-high catwalk. The board was 4 feet by 25 feet and weighed approximately 270 pounds. As it was being slid down a handrail by a crew of three employees, the board went over the rail and landed on the injured employee's left foot, resulting in a fracture.
An employee was working on a wood lamination machine to form arches. As the employee was using a hammer, it struck his thumb, resulting in a fingertip amputation.
An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.