Tennessee Valley Authority

An employee was polishing the center of a try bar on a lathe when they sustained an avulsion of the right forearm that required surgery.

Two employees were lifting and installing the lance tube into place using a combination of chain falls and manual manipulation. While moving the lance tube into place, the employee on one end lost their grip on the tube and it fell to the grating. Since the lance tube was also suspended from a chain fall, the other end went up and caught the injured employee's right hand between the lance tube and an I-beam. The injured employee suffered lacerations across the top of their little, ring and middle fingers, and fractures to their little and ring fingers. The employee was hospitalized.

An employee was utilizing a truck mounted crane to remove a trailer hitch pin. As the employee was assisting with loading the haul trailer, the tongue of the trailer fell on the employee's foot. The employee's right foot was crushed.

An employee was inspecting components and contacts of a transformer load tap changer in a substation. When the equipment rotated, it caught the employee's left middle finger, causing an amputation at the nail bed.

A contractor employee supervised by Tennessee Valley Authority was greasing a trackhoe when the bucket of the trackhoe moved, fracturing the employee's pelvis.

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

Employees were pulling three-phase power lines to a power pole. An employee's hand was caught between a pulley and a rope, resulting in amputation of the employee's index, middle, and ring fingertips.

An employee was cutting through two secondary wires with a battery-powered cutting tool. The wires were energized at 120/240 volts; when the employee cut through the insulation around a wire, an arc flash burned the employee's left thumb.

An employee had been preparing material for a lineman at a jobsite and was pulling up wire on a hand line. The employee began to feel ill, suffering from heat illness.

An employee's right hand was broken after being struck by an excavator that was being moved.

An employee was tamping at the base of a power pole when they were struck by an extendable hot arm that was dropped from an aerial bucket. The employee sustained two broken ribs on the right side, and a pneumothorax on the right side.

An employee was working to remove a stuck strap from a tray line while on an A-frame ladder. They fell 6 to 8 feet to the concrete floor, resulting in a head contusion and fractured ribs that required hospitalization.

An employee sat on an unleveled bench outside the cafeteria and fell to the concrete. The employee was hospitalized with a head contusion with bleeding and injuries to the right side of her body, her right hip, and right hand, as well as a scrape to her elbow.

An employee was cutting brush and shrubs. A bee stung the employee on the base of their neck. The employee sustained an allergic reaction and was hospitalized.

A driver was exiting his truck and fell from the bottom step to the ground. He fell on the pavement on his left side, breaking his hip.

An employee was walking to his car when he tripped over a board that was secured to the floor of the dock area. His left knee struck the cement dock. The employee was hospitalized and required surgery to repair a broken knee.