Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at GAL Manufacturing Corporation, LLC, 50 E 153rd St., BRONX, NEW YORK 10451
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was using a drill press to countersink holes so that the finished holes would be flush. He was adjusting the height of the machine when his glove made contact with the spindle. The glove ripped on the spindle, and his right middle and ring fingers made contact with the point of operation. He suffered amputations to both fingertips.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333921)
An employee walked into the chairlift hoist way and the chairlift platform was not there. The employee fell 10-12 feet to the chairlift platform on the first floor. The employee sustained a fractured femur.
An employee was dumping trash into a compactor when he lost his balance and fell approximately 5 feet into the trash compactor. The compactor was not in use at the time. The employee was hospitalized with multiple fractures.
Employees were installing components of an elevator from inside the elevator and removed temporary hoisting equipment when the elevator descended from the fourth floor to the pit floor. One employee was hospitalized with fractures to their fibula and a rib, and the other employee was hospitalized with fractures to both feet.
An employee was standing on the edge of the dumpster while pulling out cribbage. The employee fell to the ground, sustaining a fractured elbow and hip. The employee was hospitalized.
An employee was using a magnetic drill to drill a hole on an elevator door. His left glove became entangled with the drill bit, which partially amputated his left thumb below the last knuckle and removed several inches of a tendon. The employee's left middle finger was also severely lacerated. He was hospitalized and received stitches.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.