Fall onto or against object on same level, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at TANK HOLDING CORP, main st, WEST BABYLON, NEW YORK 11707
on — Fractures, affecting the lower leg(s).
Final narrative
An employee was working to secure a mold to a machine. The employee attempted to step/jump over the frame portion of a molding machine when one of his feet landed on a small square dolly. The dolly rolled and the employee fell to the floor sustaining a fractured right fibula.
An employee was struck by a forklift that was hauling a 105-gallon tank outside in the facility yard. The employee sustained fractures to both tibias and fibulas.
An employee was on a two-step ladder performing cleaning activities in the de-oiler machine. The employee fell back and his right arm was caught in the equipment, resulting in a right forearm fracture that required surgery.
An employee was changing an insert in the tool head of a CNC machine. The employee had stepped up approximately 28 inches onto the door track of the machine. When the employee went to step back down to the floor, they lost balance and fell backward onto a rack of metal parts. The employee sustained a compression fracture to the spine.
An employee was packaging steel coils on a turntable. As he walked across the turntable, he slipped and fell onto a coil. His left bicep was lacerated by the slit edge of a coil.
An employee was monitoring a lumber-stacking machine when they slipped and fell into an unbanded bundle of lumber. The outer row of lumber then fell on their left leg, fracturing their leg and ankle.
An employee was performing a maintenance task on a shape mold machine. The equipment had a clog preventing it from pumping material into the next stage. The employee's left hand was inside the hopper's butterfly valve when it unexpectedly turned. The employee's index and middle fingertips were partially amputated.
An employee was stacking used cardboard onto a pallet in the shipping and receiving area when he tripped over the scale by the loading dock door. The employee fell to the concrete floor and was hospitalized with a fractured left hip that required surgery.
On May 14, 2025, an employee was manually adjusting a plastic sheet entering the thermoforming oven when their right hand was pulled into the pin chain and idler wheel. The employee sustained the amputation of their middle finger.
At 6:30 p.m. on April 23, 2025, an employee was using a CNC panel saw when his fingers were pinned in by the pressure beam used to hold the board he was cutting. The sawblade, coming from beneath, amputated about 1/4 inch of his right little fingertip.
An employee was diagnosing an issue with a bagger that had jammed. The employee was cleaning out a piece of supporting equipment (a scrap barrel) when the blower motor contacted his right middle fingertip and fingernail, resulting in an amputation. The blower motor was not guarded at the time.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.