NORFOLK, NEBRASKA—
Nucor Vulcraft
Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Nucor Vulcraft, 1601 West Omaha Avenue, NORFOLK, NEBRASKA 68701 on — Amputations, affecting the fingertip(s).
Watch Nucor Vulcraft — free
Get an email when a new federal OSHA severe-injury report for Nucor Vulcraft is published. One employer, no account, unsubscribe in one click.
Final narrative
A joist was being lifted by a crane. An employee's right hand was squeezed between the joist and the chain, and the middle fingertip was partially amputated.
Similar incidents · Same event type
BANGOR, MAINE—
N. S. Giles Foundations, Inc.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
PERRY, OKLAHOMA—
Weld Mech, Inc.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
JEFFERSON CITY, MISSOURI—
Axium Packaging LLC
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
ASPEN, COLORADO—
PanTerra Energy
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
PITTSTON, PENNSYLVANIA—
Graphic Packaging International
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 332311)
MCALESTER, OKLAHOMA—
Meeco Sullivan
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
LOUISVILLE, GEORGIA—
CSBS Manufacturing LLC
Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.
NEW DEAL, TEXAS—
Standard Structures, Inc.
An employee was moving and handling cardboard boxes when he sustained a laceration to his left ring finger from a box. The laceration became infected and required hospitalization and surgery.
KERRVILLE, TEXAS—
Prime Metal Buildings & Components
An employee was positioning a piece of metal trim for a test bend in a single-fold bend machine. Their right middle fingertip was pinched by a clamp on the machine, resulting in a partial amputation.
DUBLIN, TEXAS—
Prime Metal Buildings & Components
An employee was operating a double folding machine and positioning a piece of metal trim in the folding clamps for a test bend. The machine activated and the crank (lower control arm that bends the trim) came up and cut through the employee s glove, amputating their right middle fingertip.
More severe injuries in NEBRASKA
NEBRASKA CITY, NEBRASKA—
Concrete Industries Nebraska City
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
LINCOLN, NEBRASKA—
4 Seasons Property Services, Inc.
An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.
KEARNEY, NEBRASKA—
Cellar Crew LLC
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
ELGIN, NEBRASKA—
BANB Farms Inc.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.