Jonesboro Manufacturing

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

A forklift operator was switching out a propane tank on his forklift when the tank leaked and sprayed his right hand, resulting in hospitalization due to liquid propane burns. PPE (gloves) were not worn at the time of the incident.

On September 2, 2025, at approximately 10:15 AM, an employee was setting a rest die in a press when the die slipped off the parallels. One of the employee's fingertips became caught in the die, resulting in a fingertip amputation.

On August 19, 2025, an employee was changing tooling on a sizing machine. The employee's left ring fingertip was pinched between the tooling and the machine and was partially amputated.

An employee was loading pipe into a flare machine when a part clamp caught her right hand. The hand was lacerated and broken. A light curtain was in place at the time of the incident.

A maintenance employee was working on the roof of a small office inside the facility. The employee fell through the ceiling and landed on the floor inside the office. The employee sustained fractured ribs and a punctured lung and was hospitalized.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.