Vartega Inc

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was running the cuber machine (moves and stacks blocks onto pallets) in the block plant. He went to manually move some blocks and the carriage of the cuber moved and pinned his midsection (abdomen, pelvis, and lower back region). The employee was hospitalized with fractures to his bottom two ribs and L3 vertebra. The machine was not locked out/tagged out at the time.

An employee opened a butterfly valve on a material hopper control panel and then went to clear a jam. The valve closed on his left hand. His left index and middle fingers were medically amputated above the knuckle.

An employee was opening a curtain on a trailer in preparation to load. When pulling on the strap of the curtain, the strap came loose, and caused the employee to fall on his back. The employee sustained three broken ribs and a subarachnoid hemorrhage. The employee was hospitalized.

An employee was pushing a mineral cart into an oven when the oven door malfunctioned and closed on their right thumb. The employee sustained a partial amputation of the thumb tip.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.