Centoco Manufacturing Corporation

An employee was going to the breakroom when they tripped over a chair and fell, resulting in a hip fracture.

An employee arrived at work and was walking into the store through the parking lot. The employee tripped over a curb and fell to the ground, sustaining a femur fracture.

An employee tripped over a box and fell to the floor, fracturing their right arm.

An employee tripped over a piece of angle iron and fell to the floor sustaining a broken hip.

An employee was preparing for a CT scan when she tripped over a loose strap and fell to the floor, fracturing her hip.

An employee was cutting a 7-foot pipe using a band saw. He went to wipe moisture off the pipe with a rag and the rag became entangled in the moving saw blade, pulling his right hand into the blade. The employee sustained a partial amputation to the fourth distal phalanx and third digit.

An employee was working in the grinding room on a production line for bathtubs. The tubs are laid on a conveyor and have wooden blocks for feet. The conveyor moves the tubs onto a saw that cuts off the wooden blocks. The saws are protected by expandable metal guards. The conveyor then moves the tubs through an area lined with coarse horsehair brushes before reaching the discharge area, where the employee was working. The employee was drilling a hole behind the metal guarding when their right hand went into the horsehair brush area and contacted a saw blade, resulting in a laceration on the back of their right hand that required surgery.

An employee was taking a part out of a press. The press's injector pin came down on his right big toe, crushing it. He was hospitalized.

An employee was cleaning saw dust off of a straight line rip saw after turning it off when his fingers contacted the blade that was still spinning, resulting in the amputations of the left middle and index fingertips to the first knuckle.

An employee was fusing two HDPE pipes in a machine when the machine amputated his left index and middle fingertips.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.