WMT Housing, LLC

An employee was going between a ladder and a wall to repair a wall in the utility room. A brad-nailing gun was hanging on a piece of wood on the side of the ladder. The employee contacted the brad nailer and the trigger was pushed into the wooden piece. The brad-nailing gun actuated and shot a 2-inch brad into the employee's abdomen.

An employee was moving a step ladder to a different location. A brad nail gun with an air hose attached was hanging on the side of the ladder. When the employee climbed the ladder, his right leg hit the safety tip of the nail gun and the nail gun shot a brad nail into the employee's right leg.

An employee was building walls for mobile home manufacturing using a 2 1/2 inch staple gun when the gun activated and a staple lodged into their right kneecap.

On May 27, 2022, at 2:30 p.m., an employee was descending a ladder while holding a nail gun when the nail gun discharged and a 2-inch nail entered the employee's upper-right abdomen, resulting in hospitalization.

An employee was looking through sheets of precut decking in an upright position. The weight of the decking knocked him off balance and caused his feet to slip and hit standing decking on the opposite side. All of the decking fell and the employee was crushed, resulting in pelvis and hip fractures.

Two employees were walking through the warehouse behind a forklift that was moving pallets of 30-foot metal bottom bars. When the forklift reversed, the top of the forklift struck a box of metal bottom bars on top of racking, causing the box to fall and strike the two employees. They were both taken to the hospital; one employee was treated and released without being admitted. The other employee was hospitalized with a fractured left orbital bone and an injured right knee.

The injured employee was spray painting lay flat shipping reels while another employee was picking up the reels with a telehandler after they were painted. The telehandler bumped a reel, causing other reels to fall. The injured employee was caught between the reels, resulting in broken left femur.

An employee was installing an aerial drop cable across a roadway. The employee was on a ladder positioned against a telephone pole. Cable had been installed on one side of the roadway. The employee was making the connection to the pole on the opposite side of the roadway when a box truck contacted the cable, causing the employee to fall onto the grass of the customer's yard. The employee sustained broken ribs and was hospitalized.

An employee was performing routine housekeeping duties when a bale of plastic bottles slid off the forks of a forklift that was backing out of a trailer. The bale struck the employee, pushing her into another machine. The employee suffered a fractured rib and punctured lung.

An employee was using a 4-by-4 to straighten a pack of wood. A forklift nudged the 4-by-4, which caused the employee's right hand to be caught between it and the pack of wood. The employee suffered a partial amputation to the right ring finger.

On September 5, 2025, an employee was installing gang plates on a structure when the side walls fell and hit her head. She then fell onto her back and the side wall pressed her to the ground, resulting in hospitalization due to an ilium fracture and a transverse process fracture on the right side.

An employee was blowing cellulose insulation into the open attic area of a manufactured home. While the employee was holding the insulation hose, it caught on the guardrail of the catwalk/suspended walkway leading into the attic. The tugging motion caused the employee to lose their footing and step onto the sheetrock ceiling. The employee fell through the ceiling to the ground about 8 feet below and suffered a broken lower left leg. The employee was hospitalized.

An employee was going between a ladder and a wall to repair a wall in the utility room. A brad-nailing gun was hanging on a piece of wood on the side of the ladder. The employee contacted the brad nailer and the trigger was pushed into the wooden piece. The brad-nailing gun actuated and shot a 2-inch brad into the employee's abdomen.

An employee was on a scaffold caulking and painting a manufactured home. She fell off the scaffold an estimated 6 to 8 feet, landing on the concrete floor. The employee suffered upper body injuries and was hospitalized.

An employee was going up a ladder from the first level roof to the second level roof. The ladder slipped and the employee fell approximately 8 to 10 feet to the surface on the first level. The employee sustained fractures to three ribs and bruises on their arms and hands.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.