Compressed or pinched by shifting objects or equipment · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Jr. Davis Construction Company, Inc., Bronson Ridge, APOPKA, FLORIDA 32703
on — Cuts, lacerations, affecting the fingertip(s).
Final narrative
Employees were building a 10-foot trench box. A loader was supporting the box wall as one of the employees was setting the top pin. The wall slid and crushed the employee's left middle finger against the loader, the fingernail was pulled off and the fingertip was split down to the bone.
HospitalizedFingertip(s)Metal plates, metal panels
More severe injuries at Jr. Davis Construction Company, Inc.
An employee was cutting sanitary pipe when he began to feel overheated and experience a headache and difficulty breathing. He then sat in the air conditioned work truck to cool down until he returned to work. The employee was carrying tools when symptoms reoccurred and he began to experience muscle cramping, resulting in hospitalization for heat illness.
Employees were installing an intermediate driveshaft in the driveline of a dump truck. One employee went under the truck to visually observe the yoke and their left thumb was crushed/lacerated in a pinch point between the universal joint cap and the yoke.
An employee was utilizing a battery-operated circular saw to cut a 6-inch back-form board when the saw blade struck their left hand, resulting in lacerations to the middle and ring fingers.
A crew was rigging an RCP pipe to be lifted by a backhoe. The injured employee signaled for the operator to lower the pipe. He was adjusting the choker cable on the pipe when the pipe was lifted again. His left index and middle fingers were then crushed between the cable and the pipe, resulting in fingertip amputations.
An employee was preparing to connect storm pipe to a structure. The employee went to connect the choker cable to the excavator bucket and the pipe slipped and struck them. The employee sustained a crush injury to the left foot that involved multiple fractures.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 238910)
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.
An employee was assisting the crew with patching and restoring a roadway after the installation of a sewer line. He was helping place and level the blacktop/backfill material over the trench area to bring the road surface back to proper grade. The employee was walking between a forward-moving dump truck and a dirt pile when his right foot was run over by the truck s wheel, causing him to fall. The employee sustained injury to his foot.
An employee was operating a skid steer with a bucket attachment at a demolition site. While driving it to the rear of the property to park it, the employee came into contact with a live electrical transformer unit that was located outside of the facility. The employee sustained electrical burns on his hands extending up to his elbows and a fractured ankle.
An employee was installing a door on a semi-trailer. They were using a forklift to lift the door to the height of the trailer when the door became jammed between the forklift mast and the hinge on the trailer. When the employee went to dislodge the door from the mast, the door fell and crushed their foot. Their big toe was amputated. The employee was hospitalized and their big toe was surgically reattached. The employee's foot and other toes also required surgery.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.