Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at GNB Fort Smith, LLC., 4115 South Zero St., FORT SMITH, ARKANSAS 72908
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was operating an industrial post machine when the machine failed to cycle properly, resulting in a "double pour" (a second lead terminal was poured before the previously poured terminal was removed). The employee proceeded to clear the terminals and the mold closed and pinched their right middle finger, resulting in amputation of the proximal portion of the finger.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 335911)
An employee was operating material handling equipment when their right foot was caught between the material handling equipment and a railing. The employee sustained fractures to the big toe and second toe.
An employee was operating a forklift when it collided with another forklift at an intersection. The employee suffered a broken lower right leg from a rack of battery plates on the forks of the other truck.
Four employees were moving a 400-pound flange to the ground when part of the load was released and the injured employee's hand became caught between the flange and the ground. The employee sustained a left middle fingertip amputation.
An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.