105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

East Penn Manufacturing Company, Incorporated

Contact with hot objects or substances · Thermal burns degree unspecified

Federal OSHA recorded a severe workplace injury at East Penn Manufacturing Company, Incorporated, 102 Deka Road, LYON STATION, PENNSYLVANIA 19536 on — Thermal burns degree unspecified, affecting the Back and shoulder.

An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.

Hospitalized Back and shoulder Molten metal, slag

East Penn Manufacturing Company, Incorporated

An employee was about 4 feet up an 8-foot A-frame ladder, working on an overhead pipe. The employee's wrench slipped and they fell from the ladder. The employee suffered spiral fractures to the left tibia and fibula.

East Penn Manufacturing Company, Incorporated

An employee was clearing a jam on a battery machine when their finger got caught between the machine and a battery case. The employee sustained a finger amputation.

EAST PENN MANUFACTURING COMPANY, INCORPORATED

An employee fell from a powered industrial truck to the floor after colliding with a stack of material. The employee suffered a back injury and broken hip.

View East Penn Manufacturing Company, Incorporated's full OSHA safety record →

Spudrock LLC

An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.

Ajinomoto Health and Nutrition North America Inc.

An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.

APAC-Alabama, Inc.

After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.

Cellar Crew LLC

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

Boise Cascade Wood Products, LLC

An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.

East Penn Manufacturing Company

An employee was walking/moving a walkie (material handling equipment) when it struck and fractured their right leg. The employee was hospitalized.

East Penn Manufacturing Company

An employee was operating material handling equipment when their right foot was caught between the material handling equipment and a railing. The employee sustained fractures to the big toe and second toe.

East Penn Manufacturing Company

An employee was operating a forklift when it collided with another forklift at an intersection. The employee suffered a broken lower right leg from a rack of battery plates on the forks of the other truck.

HL-GA Battery Company LLC

Four employees were moving a 400-pound flange to the ground when part of the load was released and the injured employee's hand became caught between the flange and the ground. The employee sustained a left middle fingertip amputation.

East Penn Manufacturing Company, Incorporated

An employee was about 4 feet up an 8-foot A-frame ladder, working on an overhead pipe. The employee's wrench slipped and they fell from the ladder. The employee suffered spiral fractures to the left tibia and fibula.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.