Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Jayco, Inc., 511 Hankins Rd, TWIN FALLS, IDAHO 83301
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was working in the cabinet shop cutting cleats with a chop saw when his hand contacted the chop saw. The employee was hospitalized; he sustained a partial amputation to his right thumb.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was working to dislodge a small piece of wood that had become stuck in a wood molder. The employee's glove became entangled in the machine's cutter head and the employee suffered a partial amputation to a finger on the right hand.
An employee was rolling a piece of structural channel on a roller table when the channel collided with steel tubing that was sitting on the roller table. One of the employee's fingers was hanging down over the piece of channel, and when it collided with the tube, their fingertip was severed. Approximately half of an inch of the employee's fingertip was amputated.
On November 21, 2024, an employee was operating a punch press running stone guard brackets. The press cycled while they were placing a part into the die, crushing their right hand. The employee was hospitalized with crushing injuries to their ring finger and an amputation of the little fingertip, and they required surgery.
An employee was inspecting and photographing a trailer unit when his left index finger was pinched between a hardware bar and the floor, resulting in a partial amputation.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.