Kohler Co., Inc.

After working on a computer server, an employee was replacing a steel beam guard. The beam dropped on his right ring finger causing a partial amputation to the fingertip without bone loss.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was cutting a 7-foot pipe using a band saw. He went to wipe moisture off the pipe with a rag and the rag became entangled in the moving saw blade, pulling his right hand into the blade. The employee sustained a partial amputation to the fourth distal phalanx and third digit.

An employee was working in the grinding room on a production line for bathtubs. The tubs are laid on a conveyor and have wooden blocks for feet. The conveyor moves the tubs onto a saw that cuts off the wooden blocks. The saws are protected by expandable metal guards. The conveyor then moves the tubs through an area lined with coarse horsehair brushes before reaching the discharge area, where the employee was working. The employee was drilling a hole behind the metal guarding when their right hand went into the horsehair brush area and contacted a saw blade, resulting in a laceration on the back of their right hand that required surgery.

An employee was taking a part out of a press. The press's injector pin came down on his right big toe, crushing it. He was hospitalized.

An employee was cleaning saw dust off of a straight line rip saw after turning it off when his fingers contacted the blade that was still spinning, resulting in the amputations of the left middle and index fingertips to the first knuckle.

An employee was fusing two HDPE pipes in a machine when the machine amputated his left index and middle fingertips.

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.