Home Mid State Thermo King

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was working next to a 12-inch, 21-foot-long pipe that was being lowered using a 1-ton chain fall. The chain fall slipped, causing the steel pipe to drop. It struck his left hand, causing the partial amputation of the ring fingertip and the loss of the fingernail.

Three employees were reorganizing a work area by staging material-handling tables. Two employees were pushing a table while the third employee guided it. The table became stuck on the wheel of another nearby table and while the two employees tried to push it free, the third employee moved the other table. The newly freed table moved forward into the other table, and the third employee's right middle finger was caught between the two. A third of the fingertip was amputated.

An employee was fabricating an evaporator fixture. The fixture was sitting on a table and the employee was utilizing a hoist and chain sling hooks to elevate one side of the fixture into position to weld a piece on it. The hoist moved slightly on the bridge trolley, creating slack in the chain that caused one of the legs of the sling to come out of the square tubing. The evaporator fixture came down onto the employee's right ring finger, pinning it against the table. The employee's finger was partially amputated and was later surgically amputated above the knuckle.

An employee was operating a shear when its blade came down and amputated his left middle and ring fingertips. The machine was guarded at the time.

An employee was removing material from a pallet rack using a standup forklift when an upper shelf was knocked out of place causing a pallet of industrial fans to fall 12-15 feet. The employee was struck by the falling pallet. The employee sustained a laceration to the front-right of their head and fractures to three vertebrae.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.