Struck by other falling object n.e.c. · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at True Manufacturing Company, 2001 East Terra Lane, O FALLON, MISSOURI 63366
on — Amputations involving bone loss, affecting the Other finger(s) n.e.c..
Final narrative
An employee was fabricating an evaporator fixture. The fixture was sitting on a table and the employee was utilizing a hoist and chain sling hooks to elevate one side of the fixture into position to weld a piece on it. The hoist moved slightly on the bridge trolley, creating slack in the chain that caused one of the legs of the sling to come out of the square tubing. The evaporator fixture came down onto the employee's right ring finger, pinning it against the table. The employee's finger was partially amputated and was later surgically amputated above the knuckle.
Amputation Other finger(s) n.e.c. Power, mechanical, and special process parts n.e.c.
More severe injuries at True Manufacturing Company
The employee was making parts at the Accupress machine and stacking them on a skid that was on a cart. The employee went to adjust the materials when the skid and parts fell on him, causing him to fall backwards with the material landing on his stomach and legs and his head striking machinery behind him. The employee was hospitalized for a fractured left kneecap and leg, a fractured right ankle and multiple lacerations to his legs, stomach and head.
An employee was performing maintenance repair on a machine when the operator started it. The employee's left arm sustained a compound fracture and elbow dislocation. The machine was not locked out at the time of the incident.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
An employee was working next to a 12-inch, 21-foot-long pipe that was being lowered using a 1-ton chain fall. The chain fall slipped, causing the steel pipe to drop. It struck his left hand, causing the partial amputation of the ring fingertip and the loss of the fingernail.
Three employees were reorganizing a work area by staging material-handling tables. Two employees were pushing a table while the third employee guided it. The table became stuck on the wheel of another nearby table and while the two employees tried to push it free, the third employee moved the other table. The newly freed table moved forward into the other table, and the third employee's right middle finger was caught between the two. A third of the fingertip was amputated.
An employee was removing material from a pallet rack using a standup forklift when an upper shelf was knocked out of place causing a pallet of industrial fans to fall 12-15 feet. The employee was struck by the falling pallet. The employee sustained a laceration to the front-right of their head and fractures to three vertebrae.
An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.
An employee was on a step ladder in a store aisle, making room on shelving for merchandise. She fell from the step ladder to the floor, suffering two fractures in her left leg. She was hospitalized, requiring surgery.
An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.
An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.