Menard, Inc.

An employee was doing a cutback on a piece of lumber using a chop saw. The saw hit a knot, the piece of lumber buckled, then kicked back and broke the kickback guard. The board was then pulled back into the blade, which lacerated the employee's left index and middle fingers.

An employee was descending a rolling ladder when she fell from the last step and her head struck the floor, resulting in a fractured pelvis.

An employee was adjusting self-dumping steel hopper to get it to latch onto the tines of a forklift. He rocked the hopper back and forth to dump. The hopper slid off the forklift and fell about 2-3 feet down onto his legs. The employee sustained a cut on his head, a bruise on his face, and both his ankles were fractured.

An employee was descending a rolling ladder and missed the last step, falling backward to the floor and striking her head. The employee was hospitalized with injuries to her head and leg.

On December 2, 2024, an employee was placing stickers on boxes coming down the conveyor line. The employee went to grab a sticker off the printer when her foot became caught on the floorboard seam, causing her to trip and fall. The employee sustained a fractured left hip.

Two employees were walking through the warehouse behind a forklift that was moving pallets of 30-foot metal bottom bars. When the forklift reversed, the top of the forklift struck a box of metal bottom bars on top of racking, causing the box to fall and strike the two employees. They were both taken to the hospital; one employee was treated and released without being admitted. The other employee was hospitalized with a fractured left orbital bone and an injured right knee.

The injured employee was spray painting lay flat shipping reels while another employee was picking up the reels with a telehandler after they were painted. The telehandler bumped a reel, causing other reels to fall. The injured employee was caught between the reels, resulting in broken left femur.

An employee was installing an aerial drop cable across a roadway. The employee was on a ladder positioned against a telephone pole. Cable had been installed on one side of the roadway. The employee was making the connection to the pole on the opposite side of the roadway when a box truck contacted the cable, causing the employee to fall onto the grass of the customer's yard. The employee sustained broken ribs and was hospitalized.

An employee was performing routine housekeeping duties when a bale of plastic bottles slid off the forks of a forklift that was backing out of a trailer. The bale struck the employee, pushing her into another machine. The employee suffered a fractured rib and punctured lung.

An employee was using a 4-by-4 to straighten a pack of wood. A forklift nudged the 4-by-4, which caused the employee's right hand to be caught between it and the pack of wood. The employee suffered a partial amputation to the right ring finger.

The injured employee was walking through the warehouse. Another associate was driving a forklift with a pallet of large format tile (slabs) when the slabs began to tip. The injured employee ran over to stop the slabs from falling, but the slabs fell on his lower left leg/foot. The employee sustained fractures in his lower leg and foot. He was hospitalized and required surgery.

An employee was doing a cutback on a piece of lumber using a chop saw. The saw hit a knot, the piece of lumber buckled, then kicked back and broke the kickback guard. The board was then pulled back into the blade, which lacerated the employee's left index and middle fingers.

On October 16, 2025, an employee was entering a parking lot after completing their work shift when they were struck by a vehicle being operated by a customer. The employee fell backward from the impact and the back of their head struck the asphalt. The employee was hospitalized due to brain bleed and a skull fracture.

An employee was descending a rolling ladder when she fell from the last step and her head struck the floor, resulting in a fractured pelvis.

On September 24, 2025, an employee was using a sledgehammer to straighten the forks on a forklift when a piece of metal broke off the fork and became lodged in the employee's leg. The employee was hospitalized.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.