MCPHERSON, KANSAS—
American Maplan Corporation
Struck by object falling from vehicle or machinery-other than vehicle part · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury at American Maplan Corporation, 823 S Bypass Rd, MCPHERSON, KANSAS 67460 on — Crushing injuries, affecting the forearm(s).
Final narrative
An employee was reaching under the base of a plastic extrusion machine to adjust the leveling foot. The leveling foot broke and the extruder platform fell on the employee's right forearm, resulting in a laceration that required hospitalization and surgery.
Similar incidents · Same event type
HOUSTON, TEXAS—
Star Pipe Products LTD
An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.
HOLLY SPRINGS, MISSISSIPPI—
KP Building Products, Inc.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
BURLINGTON, NEW JERSEY—
BJ'S WHOLESALE CLUB, INC.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
YOUNGSTOWN, OHIO—
International Steel and Counterweights LLC
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
KILLEEN, TEXAS—
Seneca Mechanical, LLC
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 333249)
BATON ROUGE, LOUISIANA—
MINTEQ International, Inc.
An employee was cleaning the floor by a belt conveyor when their right arm contacted the pulley/belting. His arm was pulled into the conveyor assembly, resulting in a fracture to his upper arm.
BERLIN, WISCONSIN—
American Industrial Sales, LLC
A backhoe tractor was moving gravel into a 1-foot-deep trench, and an employee was helping spread the gravel. The trench had been partly filled and the tractor was returning to it with a load of stone when its raised bucket struck the employee, who was standing in the trench. He was hospitalized, having suffered an abdominal injury that caused internal bleeding.
RANCOCAS, NEW JERSEY—
Inductotherm Corp.
An employee was correcting a bend on a brake press when their left middle finger was crushed in the machine.
PEARLAND, TEXAS—
Pro-Line Water Screen Services Inc
An employee was inside the frame of a traveling water screen that was up on sawhorses. The employee was working to fit a foot-shaft assembly onto the boot section when their left index finger was crushed and fractured between the sprocket and the set collar or chain. The fingertip was amputated.
COLDWATER, OHIO—
Lincoln Electric Automation - Coldwater
On July 26, 2025, an employee was assembling a custom-designed automation line. During troubleshooting, he made contact with a photoelectric sensor that was part of the machine s part detection system. This triggered a small pneumatic crimping cylinder, which activated and came down on the tip of his right thumb, resulting in a partial amputation without bone loss.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.