Global Tungsten & Powders Corp.

An employee was visually inspecting the calciner (furnace) tube. When the employee removed the manifold for the calciner tube, tungsten (product) and nitrogen and/or hydrogen caused an explosion inside the calciner tube. Flames shot out of the end of the tube and burned the employee's face and right forearm.

On October 26, 2016, an employee was hospitalized for smoke inhalation from a fire that ignited in the dust collection system.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was monitoring a conveyor at the operator station. A piece of metal was fed to a conveyor system and it struck another piece of metal, causing a piece of titanium (1-inch-long and 1/2-inch-wide) to break off and strike the employee in their upper chest below the clavicle. The employee was hospitalized and the embedded piece of metal was surgically removed.

An employee was working by the slag side of a reverb in the furnace department. They returned home after the end of their shift and began feeling muscle cramps, resulting in hospitalization due to dehydration.

An employee had been working in the refinery area of the facility. He then began to feel dizzy and suffered other heat illness symptoms. He was hospitalized for possible heat stress.

On May 14, 2025, an employee was sitting cross-legged and removing a pneumatic rail car vibrator from its bracket to empty the next pocket in the rail car. When the employee went to set the vibrator down, he placed it on a hammer that was sitting in front of him and the vibrator teetered to the side, catching his little finger. The employee sustained an amputated fingertip at the first knuckle.

An employee was opening a railcar compartment using a wrench when the tool broke and the employee slipped and fell to the same level. The employee sustained a fractured lower right leg.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.