Rotella's Italian Bakery, Inc

An employee was cleaning the conveyor system when the chain and sprocket amputated a finger.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee (who had recently walked through water accumulated on the floor) slipped and fell to the floor. The employee suffered a broken right wrist and right elbow and was hospitalized, requiring surgery.

An employee was performing maintenance on a production line, requiring a testing and positioning phase for the whipped cream dispensers. The employee was positioning the dispensers using wrenches when one of the sensors was triggered by the pie pans coming down the line. The depositor heads lowered and pinched the employee's left ring finger, resulting in an amputated fingertip. The whipped cream dispensers were not guarded at the time and the line was not locked out/tagged out.

During a line changeover, an employee was rinsing a depositor with water. The employee was working to remove a piece of chocolate, stuck in the machine's roller, when the roller's moving parts caught his middle finger. He suffered an amputation to the fingertip with bone loss.

An employee was emptying a trash can into a dumpster. He tripped while turning around, fell over a rail onto the concrete floor, and broke bones in his back and wrist.

During a changeover, an employee was wiping down the dough chunker machine and the chunker closed on his left hand. The employee sustained crushing/laceration injuries, requiring hospitalization and surgery.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.