105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Garney Holding Company

Struck by object or equipment rolling freely · Fractures

Federal OSHA recorded a severe workplace injury at Garney Holding Company, PAR 1232 2nd Creek Interceptor Construction Project East 78th Ave and Tibet St., DENVER, COLORADO 80249 on — Fractures, affecting the lower leg(s).

An employee was working in a trench box directing the placement of bedding. A 2' x 2' piece of dirt broke off from the front of the trench, rolled down into the box, and struck the employee's lower left leg. The employee was hospitalized for a tibia and fibula fracture.

Hospitalized Lower leg(s) Dirt, earth

Garney Holding Company

Two employees were assembling a 12-inch valve with it standing up. As they went to spin it, the valve fell to the ground. The injured employee reached to grab it when his left little finger was caught between the valve and an excavator bucket that was laying on the ground, resulting in a partial amputation.

Garney Holding Company

A Garney Holding Company employee was helping maneuver an 84-inch pipe being installed in a 14-foot trench excavation. The employee was using PVC tubing to tilt the pipe downward to cross under a utility line; the tubing lost contact with the pipe, causing the employee to slide downward and make contact with the pipe, then the bottom of the trench. The employee's right ankle was broken.

View Garney Holding Company's full OSHA safety record →

Tower Extrusions Olney

An employee was collecting trash when they were struck by a rolling utility trailer. The employee sustained a right ankle fracture.

Richard E. Pierson Construction Co., Inc.

An employee was unrigging steel when an 8-inch by 50-foot, 4,875-pound piece of steel rolled onto their left leg, resulting in a fracture.

FedEx Ground

An employee was connecting a dolly to a trailer. The equipment rolled away, causing the employee's left index finger to be crushed between the trailer and the dolly. The employee sustained amputation of the fingertip.

KRFD Amazon Rockford

On October 17, 2023, at 9:55 p.m., an employee was working on a ramp while moving merchandise from a cargo loader to a dolly. The employee was putting the locks on the dolly and transferring a unit load device containing packages when she realized the lock was in the down position. As she attempted to fix the lock, the unit load device started moving toward the dolly, and the employee became wedged between the dolly and the device. The employee suffered an injury to her lower left leg.

Williams Erection Company

Two employees were shaking out steel beams and standing them vertically. One beam was hit, causing the other beams to fall. A beam then rolled over an employee's left shin and fractured it. The employee was hospitalized and required surgery.

Simon Contractors of South Dakota, Inc.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

Cypress Gulf Development Corp.

An employee fell while stepping off the tailgate of a pickup truck. The employee landed on the ground and suffered a broken left fibula and tibia.

Circle H Contractors, LP

On October 7, 2025, employees were conducting trenching operations for the installation of a new sewer line system. The excavator's bucket was detached and put inside the trench as it was being exchanged for a different-sized bucket. An employee entered the trench with a shovel to move some dirt located at the front end of the pipe. The excavator bucket shifted and slid, striking the employee s right foot and trapping it against the ground. The employee sustained a fractured right tibia.

WPM-Southern, LLC

Employees were working to dislodge a large truck that was stuck in a rut using tow straps and a front-end loader with the bucket removed. An employee connected the straps to the loader and truck and another employee slowly engaged the loader to close the coupler. The injured employee's arm became caught in a pinch point. The employee was hospitalized with a fractured arm.

Garrison Enterprise Inc.

An employee was lifting a piece of 30-inch line stopping equipment using a jack screw. A lifting eye weld snapped and the load dropped. The end of the jack screw then landed on the employee's heel and crushed it. The employee was hospitalized.

ABC Supply Company

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

Burke Builders Inc

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

Circle Graphics, Inc.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

FLATIRON CONSTRUCTION CORP.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

Takkion OPS Management

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.