AMERIT FLEET SOLUTIONS

The injured employee was securing a dolly to the back of a shop switcher (vehicle). The employee was closing the pintle hook on the dolly when the vehicle began driving. The injured employee was caught in the pintle, resulting in an amputation to their thumb without bone loss.

An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.

An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.

An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.

An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.

An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.

An employee was helping unload steel slit coils on a slitting line, using an overhead crane with a C-hook. The coil did not fit properly onto a turnstile. Another operator went to remove the coil from the C-hook using a forklift while the employee held the C-hook steady. The forklift contacted the coil, causing it to fall from the hook. It landed on the employee s foot, breaking four bones. The incident took place during a training activity.

An employee was trying to open the stuck tailgate of a truck. When he pulled on it, it gave way, causing him to fall back and hit his head on the pavement. He suffered a head laceration/contusion.

An employee was mounting an ATV tire. As he was inflating it, the rim came out of the tire and struck his right leg, breaking it below the knee.

On July 25, 2025, an employee was lowering a vehicle on a lift. The employee's right index finger was caught in the lift and partially amputated.

An employee was performing a repair and using a radial arm saw when they lacerated their index finger. The employee was hospitalized with an infection.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.