CANTEX INC.

An employee turned a corner while walking, tripped over the corner of a pallet on the floor, fell onto her arm, and broke it. She was hospitalized, requiring surgery.

An employee was working at an extrusion line and monitoring pipe as it came out of the extrusion machine. The employee went to prevent the production of a defective part and his hand passed through a sensor that triggered the action point for the machine. The machine's clamp came down to pick up the formed pipe and it fractured the employee's arm.

An employee was comparing the lengths of two magnetic servo rods. The rods came together and pinched the employee's right index fingertip, causing a partial amputation.

An employee was operating a conveyor belt when her left middle finger got caught in the gearbox. The employee suffered an amputation.

An employee was attempting to unjam a machine when the hold down clamp activated and crushed his right ring finger, resulting in amputation below the fingernail. The machine was not locked out or tagged out at the time.

An employee was going to the breakroom when they tripped over a chair and fell, resulting in a hip fracture.

An employee arrived at work and was walking into the store through the parking lot. The employee tripped over a curb and fell to the ground, sustaining a femur fracture.

An employee tripped over a box and fell to the floor, fracturing their right arm.

An employee tripped over a piece of angle iron and fell to the floor sustaining a broken hip.

An employee was preparing for a CT scan when she tripped over a loose strap and fell to the floor, fracturing her hip.

Employees were hooking up a new reel of pipe to be processed into shorter lengths. This process involved routing a winch cable through a haul-off and attaching it to the pipe using a clamp. One employee held the winch cable while another pressed the feed-out button to loosen the cable. The cable tightened and pulled the hand of the employee holding it into a pulley. The employee's right index and middle fingertips were amputated at the first knuckle.

An employee was cutting pipe using a saw when she received an electrical shock from the power tool. The employee was hospitalized.

An employee was overseeing production on a winder machine and went to clear a jam when the head stock amputated their right thumb and index fingertip.

On 8/22/2025, an employee was working to clear a grinder jam. The employee was using a "no-touch tool" to rotate the drum of the grinder. He slipped forward and his right hand contacted a pinch point between the backside of the blade and the grinder housing. The employee's right middle fingertip was partially amputated with bone loss.

At about 1:25 a.m. on August 14, 2025, an employee was operating a 10-inch band saw at a molding machine. The employee was working to cut the sprue off a PVC fitting. The blade snagged on the sprue and pulled his left index finger into the blade, which cut it. The finger was partially medically amputated.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.