Power Pallet, Inc

An employee was using a large pot to carry hot oil from the fryers. His left foot got caught on a hose that was on the floor and the pot fell. When the pot hit the floor, the hot oil splashed upward onto the employee's face, hands, and legs causing second-degree burns.

While on a scissor lift, an employee was cleaning an overhead fan. The employee tripped over the hose of a wet/dry vacuum and his right hand struck the running fan blade resulting in amputation of the middle fingertip. The fan was not guarded at the time of the incident.

At 3:23 p.m. on March 21, 2022, an employee was returning to her workstation when she tripped over a plastic band with her left foot, suffered a broken right femur as she tried to regain her balance, and collapsed to the floor. She was hospitalized.

An employee was climbing down a track ladder. The employee's left foot twisted on a step as their other foot reached the floor, and the employee's shin was broken.

Employees were at a site to remove old glass from a building and install new glass when it began to rain. An employee was stowing a lift when he stumbled over a curb/curb bumper and dislocated his knee.

An employee was cutting wood with a miter saw when their clothing was pulled into the blade, resulting in a bicep laceration. The employee was hospitalized. The blade cover was not in place at the time of the incident.

Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.

An employee was operating a bubble wrap production line. He was splicing the ends of the film rolls together with tape when a driven roll contacted his hand. His hand and arm were pulled into the machine up to his shoulder. The employee's forearm contacted the the hot surface (230-500 F) of the bubble stamping cylinder. He was hospitalized with burns to the forearm that required surgery and crushing injuries to the hand and forearm without fractures.

An employee was operating a pallet dismantling saw. A board became stuck, and the employee tried to pull the pallet. When the board broke, the employee's right hand made contact with the blade, resulting in the amputation of the right middle finger above the second knuckle.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.