105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Jindal Tubular USA, LLC

Compressed or pinched by shifting objects or equipment · Amputations

Federal OSHA recorded a severe workplace injury at Jindal Tubular USA, LLC, 13092 Seaplane Rd., BAY SAINT LOUIS, MISSISSIPPI 39520 on — Amputations, affecting the fingertip(s).

An employee was preparing to move a 75-foot pipe. The employee used a pipe bar tool to grab the pipe with two prongs on the lip of the pipe, then began to move the pipe. The employee's fingers were pinched between the pipe bar and another, adjacent pipe. The employee's fingertip was surgically amputated.

Amputation Fingertip(s) Metal pipes, tubing

Jindal Tubular USA LLC

An employee was rolling pipe on a table to reposition it and finish grinding on the edge. Another pipe (weighing 4 tons) was moving down the same table and struck the employee. The employee was hospitalized with fractured ribs and a partial lung collapse on the right side.

Jindal Tubular USA, LLC

An employee was caught between a large pipe and a paint booth resulting in multiple back fractures.

Jindal Tubular USA LLC

An employee was grinding a pipe that was on a rotator when his right hand got pulled between the rotator and the pipe, resulting in broken bones in his hand and wrist.

Jindal Tubular USA LLC

An employee was applying pipe identification to a pipe moving along a v-roller line. A support frame failed and the pipe fell over, injuring the employee's hips/pelvis and leg.

Jindal Tubular USA LLC

An employee was grinding the end of a 30-inch diameter, 40-foot long spiral steel pipe. The pipe was spinning and was set on fixed rotating wheels. The employee was in line with the V-roller line which brings pipe to the rotation station. The V-roller line engaged, sending a pipe in a south to north track. The employee was caught between the moving pipe and the pipe that was on the rotating wheels. The employee was hospitalized for an abrasion.

View Jindal Tubular USA, LLC's full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

Vallourec Star, LP

An employee fell onto a hot billet and suffered a burn to the left leg. The employee was hospitalized.

The Tube Fabrication Company, Inc.

An employee was cutting wooden boards using a table saw when the glove on his left hand was caught by the blade, resulting in a partial fingertip amputation.

Hanna Steel Corporation

An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.

Bull Moose Tube Company

A crane was hoisting a pipe. An employee was adjusting twisted lifting chains on the end of the pipe when the pipe was raised, causing the employee's hands to be caught between the chains and the pipe. The employee suffered injuries to the left index finger, left ring finger, right ring finger, and right index finger; the right index fingertip was amputated without bone loss.

Tex-Tube Company

During a routine inspection, an employee placed their hand on a pipe to check a weld. The pipe clamp activated, closed on the pipe, and trapped the employee's right middle finger, resulting in a partial amputation and fracture to the fingertip as well as a laceration to the ring finger.

Howard Industries Inc.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

Hobby Lobby Stores, Inc.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

Owl's Head Alloys West Point

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

Ingalls Shipbuilding

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

Heavy Equipment Movers and Installation, LLC

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.