Joy Mark, Inc

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was operating a transfer car when it stopped moving. He noticed that a brick had fallen and jammed. When he went to remove the brick with a shovel, the car started moving and caught his left foot against the pit's concrete wall. He suffered a fracture and lacerations to the lower left leg.

On July 2, 2025, an employee was walking to a building through a shed used to store dirt and went to climb a 45-inch pile of loose clay material when they tripped and fell forward. The employee sustained a dislocated right ankle, torn ligaments, a fractured tibia, and sprains to the right ankle and leg. The employee was hospitalized.

An employee was operating a stationary masonry saw, cutting faces from bricks for sample boards. The saw blade lacerated the employee's right forearm and the employee was hospitalized, requiring surgery.

An employee was removing a jammed ceramic tile from the stacker line and broke the jammed tile with another tile. The tile shattered and a sharp piece remained stuck on the belt, lacerating his arm. The employee sustained a severe laceration above the wrist and nerve damage that required surgery.

An employee was removing debris/material from the door of the mixer when their right hand was caught in the auger of the mixer. The employee sustained right index and middle finger amputations from the paddle of the mixer.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.