Slip, trip, stumble while stepping between levels · Fractures and soft tissue injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Acme Brick Company, 22436 Highway 67 North, MALVERN, ARKANSAS 72104
on — Fractures and soft tissue injuries, affecting the Multiple lower extremities locations unspecified.
Final narrative
On July 2, 2025, an employee was walking to a building through a shed used to store dirt and went to climb a 45-inch pile of loose clay material when they tripped and fell forward. The employee sustained a dislocated right ankle, torn ligaments, a fractured tibia, and sprains to the right ankle and leg. The employee was hospitalized.
An employee was operating a transfer car when it stopped moving. He noticed that a brick had fallen and jammed. When he went to remove the brick with a shovel, the car started moving and caught his left foot against the pit's concrete wall. He suffered a fracture and lacerations to the lower left leg.
An employee was packaging brick. A brick broke from the bundle and became lodged between the conveyor rollers. The employee was removing the brick when the bundle of brick shifted forward, catching his left index finger between the bundle and the conveyor roller and resulting in a partial amputation to the fingertip.
An employee was emptying a small hopper into a larger hopper. When they pulled the return latch to return the small hopper to its original position, the employee's finger was caught between the hopper and the latch, resulting in an amputation to the distal phalanx.
An employee was picking up broken bricks from the floor to throw into a hopper. A forklift reversed, and its counterweight struck the employee. The employee suffered a broken left foot, as well as injuries to the leg and ankle, and was hospitalized.
An employee was packaging brick when a brick broke and became jammed between the back plate and the jig side. When the jig cycled, the broken brick caused the jig to buckle. As the employee was putting brick into the jig, his left wrist struck the outer side of the buckled jig, resulting in a contusion that required hospitalization.
An employee was walking through a parking garage. She tripped over a curb and fell forward onto her right knee, then her left knee, both hands, and her face. She suffered an injury to the left knee that required surgery, as well as scrapes on the chin and both palms and soreness in the left wrist.
An employee was dropping customers off with a shuttle. He stepped out of the shuttle and his foot entered a pothole, causing him to twist his ankle and then fall to the ground. The employee sustained multiple dislocations to the ankle requiring surgery.
An employee was approximately 5 feet up on a ladder while drilling a hole for cable installation. A wasp attacked him. As he was coming down the ladder, he landed flat on his feet on the ground, and his right leg was twisted. The employee sustained a fractured tibia.
More severe injuries in this industry (NAICS 327120)
An employee was operating a transfer car when it stopped moving. He noticed that a brick had fallen and jammed. When he went to remove the brick with a shovel, the car started moving and caught his left foot against the pit's concrete wall. He suffered a fracture and lacerations to the lower left leg.
An employee was operating a stationary masonry saw, cutting faces from bricks for sample boards. The saw blade lacerated the employee's right forearm and the employee was hospitalized, requiring surgery.
An employee was removing a jammed ceramic tile from the stacker line and broke the jammed tile with another tile. The tile shattered and a sharp piece remained stuck on the belt, lacerating his arm. The employee sustained a severe laceration above the wrist and nerve damage that required surgery.
An employee was removing debris/material from the door of the mixer when their right hand was caught in the auger of the mixer. The employee sustained right index and middle finger amputations from the paddle of the mixer.
On September 7, 2024, at approximately 2:00 PM, an employee was operating a golf cart inside the facility when they were thrown from the golf cart. The employee was hospitalized with facial fractures, a concussion, and a contusion.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.