Infinity Specialty Tapes, LLC

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was rolling up sheets of sealant using a rotating mandrel when her right hand was caught in the mandrel. Her right arm was pulled into the roll of material. The employee was hospitalized with three fractures to her right arm.

An employee worked a full shift and later started cramping up due to exposure to heat and high humidity. The employee was hospitalized with heat exhaustion.

At 2:05 p.m., the injured employee was shadowing another operator. They went into the aerosol gashouse as part of training. As they entered, the self-closing overhead door shut while the injured employee's right hand was still on the edge. The employee's little fingertip was caught and partially amputated between the door and the frame.

An employee fell from the top of a fixed ladder, passing through the ladder's access opening and landing on the floor about 6-7 feet below. He suffered nine broken ribs (four on the left side and five on the right), as well as a punctured lung. He was hospitalized.

On April 8, 2025, an employee was unjamming a conveyor belt. It reactivated, and his right little finger was caught between the belt and a conveyor roller. He suffered a partial amputation of the fingertip.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.