Part of occupant s body caught between vehicle and other object in nonroadway transport incident · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Harrigan Lumber Co., Inc., 1033 Hornady Drive, MONROEVILLE, ALABAMA 36460
on — Crushing injuries, affecting the hand(s), unspecified.
Final narrative
An employee was operating a mini skid steer, trying to get wood waste from under a trimmer unscrambler. The skid steer cantilevered forward and the employee's left hand was crushed between its control handle and a crossbeam under the trimmer.
HospitalizedHand(s), unspecifiedSkid steer loaders, mini loaders
An employee was operating a planer feed table. As he was clearing a jam, his left hand was caught between the speed-up roll and a piece of timber. He suffered amputations to the left ring and middle fingers to the first and second joints. The machine was not locked out at the time of the incident.
An employee was positioned between a skidder and a forklift when the skidder backed up and pinned the employee between the two pieces of equipment. The employee was hospitalized with broken ribs, a punctured lung, a ruptured spleen, and a liver laceration.
An employee was training on an rolling container carrier on the dry, non-frozen storage side of the distribution center. She made a turn around the end cap and her right foot struck the rail protecting the endcap racking. The employee's foot was fractured.
An employee was a passenger in a utility vehicle that was driving up a hill on a wooded trail. As the vehicle made a right turn, three fingers on the employee's right hand were caught against a tree and fractured.
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.