GATES CORP.

An employee was fabricating a braided rubber hose. They pulled on a reel to get more material. When the reel moved, it turned on a groove in the concrete floor and impacted a tray. The employee's right hand was then pinned between the reel and the edge of the metal tape dispenser on the tray, resulting in a partial amputation of the middle finger.

An employee was assembling orders while driving a forklift. While she was placing parts on a pallet, she turned around and fell backward and horizontally approximately 6 feet and struck her head on the lower level of the shelving rack. The employee sustained a fractured elbow, lacerations to the head, and brain bleeding.

An operator was working at the north end of a strip table with another operator at the south end of the table at a nylon unwrapper. The operator was trying to keep the 3/8" pole on the rollers to help the pole spin as the nylon was being removed from the pole. The end of the pole got caught in a roller and the operator's hand got tangled together with the pole. When the operator pulled his hand out of the entanglement, his right middle fingertip was amputated. The finger was also broken below the amputation point.

An employee was stepping out of a car when they slipped and fell on ice, resulting in a femur fracture.

An employee was closing up for the weekend when they slipped on oil and brake fluid and fell. The employee suffered a leg fracture.

An employee was working in the forest flagging an area to be harvested. He took a step and his foot slipped on a stick hidden under the leaves, causing him to fall to the ground. He landed on his right foot/lower leg resulting in a fractured tibia.

An employee was inspecting an apartment to ensure it was ready for a new resident to move in. The carpet in the apartment had been recently cleaned and was still wet. As the employee went from the carpet to the tiled floor of the bathroom, they slipped and fell, resulting in a torn left hamstring.

An employee was delivering a letter along a rural carrier route when she stepped on an ice-covered snow drift, slipped, and fell to the ground. The employee sustained a right hip fracture that required surgery.

An employee was preparing to cut rubber stock on a pneumatic cutting machine when their middle and ring fingertips were amputated by the cutting blade.

At about 12:25 a.m. on September 3, 2025, an employee was troubleshooting a malfunction involving a slitter whose arbor was not rotating as expected. The employee was observing the slitter's operations when the arbor completed its cycle and the employee's right index finger was drawn into the slitter's 4-inch, non-rotating cutting blade. The fingertip was amputated.

An employee was operating a rolling rope machine. Tooling fell out of the machine and landed on the employee's foot, breaking bones. The machine was not guarded at the time.

An employee was operating a machine when hot air and water was released. The employee sustained burns to the neck, back, buttocks and leg on the right side.

An employee was operating a slitter machine when the roller bar amputated the tips of their right middle, ring and little fingers.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.