County Materials Corporation

An employee was exposed to carbon monoxide that was leaking from a kiln. The employee lost consciousness and was hospitalized.

At 10:00 a.m. on March 28, 2023, a side plate of a forklift lifting apparatus came loose at the bottom. An employee was reattaching the plate to the apparatus when the plate displaced and landed on his left foot, just beyond the steel safety toe. He suffered a partial amputation to the third toe.

Two employees were offloading 12-inch pipes from a truck at a construction site. They were operating the offloading mechanism when one employee's left little finger was pinched between one rolling pipe and the next. The finger was degloved and the fingertip was medically amputated.

An employee was making 12-inch by 32-inch concrete paver blocks. The employee was checking the blocks for cracks when the fingers cart cycled to collect a pallet of blocks from the stacker. The employee was caught between the fingers cart and the stacker and suffered fractures to the left wrist/arm, left side of the pelvis, and lower back.

An employee was placing a chuck and strand into a stressing jack arm. The chuck and strand fell into the ram. The employee grabbed the chuck and tried to reposition it. At the same time, another employee was moving the ram down and the injured employee's right little pinky and ring fingers were pinched between the chuck and stressing ram. As a result, the employee's right pinky fingertip was amputated and right ring finger was cut.

An employee was using an air compressor on a multi-wheel tire when the flange and the tire burst, causing the wheel's lock ring to strike the employee in the face. He sustained a laceration and facial fractures.

An employee was changing the connection to a compressed nitrogen tank when the system failed and exploded. One employee suffered a concussion and was hospitalized. The other employee sustained soft tissue injuries that did not require hospitalization.

An employee was putting air in a tire that was mounted on a customer's vehicle when the tire exploded, resulting in a left arm fracture that required hospitalization.

An employee was working in a kitchen when a spray can of oil exploded. Hot oil splashed onto the employee, burning their face and arms.

On October 24, 2023, at 12:00 PM, an employee was visually checking a gauge on the "U" controller when a pressure tank exploded. The employee was hospitalized with multiple facial fractures and required surgery.

An employee was anchored to a movable piece of equipment called a "lid" with a self-retracting lifeline harness. An overhead crane lifted the equipment, causing the employee to be pulled by his harness. The employee was pulled off the walkway and swung over the wall of the kiln. His body and head struck the wall. The employee lost consciousness and sustained a laceration to the side of his head that required stitches. The employee also sustained multiple fractured ribs and fractured vertebrae.

An employee was using an overhead crane to lower a manhole cylinder to the ground to complete maintenance and cleaning. While removing a lifting hood from a manhole core (steel cylinder), the cylinder rolled and the employee's left little finger was caught between the crane hook and the lifting eye. The employee's little fingertip was amputated just below the nail.

An employee was moving a 4x4 box jacket with an overhead crane. The employee hooked a chain to the jacket and put tension on it. It spun awkwardly, striking the employee and knocking him over. The employee fell on the same level and sustained a fractured rib and lacerations to his lower left abdomen and backside.

An employee was guiding a forklift operator who was placing a 48-inch form jacket (open cylinder) over a core (solid, stationary cylinder). The employee was positioned on the ground adjacent to the core. As the suspended jacket was positioned over the core, a gust of wind caused the jacket to move. The employee reached to steady it and the jacket moved downward pinching his left little finger between the jacket and the core and resulting in a fingertip amputation.

An employee was at the bell packer when the scraper of the bell packer struck his hand. The employee sustained broken fingers and degloving injuries involving their right ring and little fingers.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.