G3 Industries, Inc.

An employee depressed the foot pedal on an air bending machine to bend parts. He rested his left hand on the area where the arm meets the bending roller, which controls the bending arm. When he released the foot pedal, the bending arm automatically returned to home position and his left thumb was pinched between the arm and the bending roller. His left thumb tip was amputated as a result.

A technician was troubleshooting a multi-spindle CNC lathe which is used for metalworking. The technician was manually spinning the spindle which causes the belt and pully to spin. The injured employee s hand became caught in the machine resulting in an amputation to the left index finger.

An employee was operating a lathe with a vacuum ejector. The part being ejected got caught in the unloader tube; as the employee was removing it, the employee's left index finger was caught between the ejector tube and the next part. The finger was amputated.

An employee was operating a spring forming machine to cut a compressed piece of wire when a piece of metal flew and struck the employee's chest. The employee suffered broken ribs and internal organ damage that required hospitalization.

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

An employee was driving a powered industrial truck (PIT) carrying a nesting sheave on the back counterweight of the PIT. He was holding the sheave when the PIT struck a pothole in the floor, causing the sheave to roll forward and crush his right index fingertip against the back of the PIT seat frame. The employee's fingertip was amputated, requiring hospitalization and surgery.

An employee was building slings. They were placing wire rope in a pneumatic vise when their right index finger was caught between the vise and the wire rope, resulting in a fracture that required hospitalization and surgery.

On September 15, 2025, an employee was working on an auto-welder when the guard closed on their left ring finger, resulting in a fingertip amputation.

At about 7:15 a.m. on August 28, 2025, an employee was using a construction compactor to stabilize the dirt of a dam that had just been built. The dirt gave way underneath the compactor, which tipped on its left side. The employee fell out and was crushed and pinned between the compactor and the dirt. He was hospitalized, having suffered a broken sternum and broken ribs on both sides, as well as a laceration to the left leg by the ankle joint.

A temporary employee was stripping wire for scrap when the machine crushed their left thumb and little finger.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.