Caught in or compressed by equipment or objects, unspecified · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Best Block, 16790 Gator Road, FORT MYERS, FLORIDA 33912
on — Cuts, lacerations, affecting the arm(s), unspecified.
Final narrative
An employee was climbing a ladder to apply a belt dressing on a moving head pulley. Their arm became caught in the pulley, resulting in a laceration that required stitches.
An employee was using a forklift to deliver rebar to a jobsite. The rebar could not fit through the delivery gate and was raised in order to clear the gate. The rebar then caused the forklift to tip forward, causing the employee to strike his head on the roll cage. The employee sustained a neck fracture.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 327331)
On September 30, 2025, an employee was applying production labels to a splintered piece of pallet on a conveyor. Their right middle finger was caught as the split line exit conveyor moved forward, resulting in an amputation.
An employee was operating a pattern block roller machine. The employee was pinned (at the mid- to upper torso) between the pusher bar and the assembly platform. The employee suffered broken ribs.
Employees were chipping concrete/brick to separate a building for demolition when the wall collapsed and debris fell onto the employees, resulting in hospitalization of two employees. One employee sustained a fractured left femur and a head injury, and the other sustained a severe head injury.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.